Keebox IPC1000W User Manual
Also see for IPC1000W: Quick installation guide
                                                                                                              | |
Contents
| 
KView Software762. Select the camera to add from the list, enter the administrator’s user name (ID) and password, a preview of the live video display will appear.Click OK, add this camera, a confirmation message informs when the camera is connected and added to the KView monitoring group.Repeat this procedure for all the cameras being added. Click the Exit button after all the cameras have been added.If the camera does not appear listed, click the Input the location of camera tab above the list to view a new menu. Enter the IP address orthe URL (for example, ipcam.ddns.org) of the camera being added, type the user name and password and click Preview to verify that a linkcan be established. The live video of the camera should appear in the Live preview display. If a link cannot be established, run the SetupWizard software for the camera and verify the correct IP address. Click Exit to return to the main Add camera menu.3. Once the cameras have been added, they are ready to be used in the main KView user interface. Close the Add camera menu (click Exit) togo to the main user interface. See below for a description. |
manualsdatabase
Your AI-powered manual search engine