Kelsec TgForce3D User Manual
                    | |
Contents
| 
Version 2.2 TgForce3D Sensor User Guide P a g e | 12The Settings viewFind/Connect New SensorIf more than one TgForce sensor is active nearby,you can select one using this function. You also usethis function to pair with a new sensor. Eachsensor has a specific ID number to differentiatethem from other sensors. Use this function if youencounter issues with automatic pairing of thesensor.Impact Monitoring SectiongMax Warning & AdjustmentThis is where you can adjust the impact thresholdfor receiving and displaying warnings. The red linein the Session view chart will be set at this value.Audio FeedbackIf activated, the iOS device will generate either a'Beep' or a 'Drum' sound when the impact level isabove the gMax thresholdDisplayFor selecting 3D vector or an individual axe (X, Y, Z)in the session view and the History/Graph view.Retrieve Data SectionCheck and Download dataThe TgForce3D sensor records all steps in internalmemory during a running session. Therefore, you can run without the iOS device nearby and recover therunning data at a later time. Please review carefully how the sensor manage the recorded data. When 'check and Download data' is selected, the sensor will look for the most recent sessionwith at least 20 steps. All steps will be downloaded for that session. A new session is restarted if the sensor has not been used for at least 5 minutes. For example, ifyou plan to record multiples sessions, you must wait at least 5 minutes (until the sensor goesinto sleep mode) between each running session. If you do not wait at least 5 minutes, all steps will be recorded in the same session. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine