Kelsec TgForce3D User Manual
                    | |
Contents
| 
Version 2.2 TgForce3D Sensor User Guide P a g e | 16Sensor CalibrationFor best performance, you should make sure the sensor isadequately calibrated. Do a short run with the sensor andmake sure that the number of steps indicated on the mainsession view correspond exactly to the number of steps youdid in the session (step count for the leg with the sensor).If the cadence is sometimes very low or the step countdisplayed is lower than the actual number of steps.● Reduce the sensor impact threshold value (Settingsview, Advanced Settings, Sensor Threshold). Tryreducing the threshold 1 step at a time.If the cadence is sometimes very high or the step countdisplayed is higher than the actual number of steps:● Increase the sensor impact threshold value (Settingsview, Advanced Settings, Sensor Threshold). Tryincreasing the threshold 1 step at a time. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine