Kemppi 350 Operating Manual

Contents

EN7.2 PeriOd MaintenanCeNOTE! Period maintenance should only be carried out by a suitably qualified person. Disconnectthe plug of the machine from the mains socket and wait approx.2 minutes (capacitor charge)before removing the cover plate.Check at least every half year:• Electric connectors of the machine – clean any oxidized parts and tighten looseconnections.NOTE! You must know the correct tension torques values before starting the reparation of the loosejoints.Clean the inner parts of the machine from dust and dirt e.g. with a soft brush and vacuumcleaner. Also clean the ventilation net behind the front grill.Do not use compressed air, there is a risk that the dirt will compact even more tightly intogaps of cooling profiles.Do not use pressure washing devices.Only an authorized trained electrician should carry out repairs to Kemppi machines.7.3 serViCe shOP MaintenanCeKemppi Service Workshops complete maintenance according to their Kemppi serviceagreement.The major points in the maintenance procedure are listed as follows:• Cleaning of the machine• Checking and maintenance of the welding tools• Checking of connectors, switches and potentiometers• Checking of electric connections• Checking of mains cable and plug• Damaged parts or parts in bad condition are replaced by new ones• Maintenance testing.• Operation and performance values of the machine are checked, and when necessaryadjusted by means of software and test equipment.software loadingKemppi Service Workshops can also test and load firm ware and welding software.8. disPOsal OF the MaChineDo not dispose of electrical equipment with normal waste!In observance of European Directive 2002/96/EC on waste electrical and electronicequipment, and its implementation in accordance with national law, electrical equipmentthat has reached the end of its life must be collected separately and taken to an appropriateenvironmentally responsible recycling facility.The owner of the equipment is obliged to deliver a decommissioned unit to a regionalcollection centre, per the instructions of local authorities or a Kemppi representative. Byapplying this European Directive you will improve the environment and human health.22FastMig Pulse 350, 450 / © Kemppi Oy / 1110