Kemppi 350 Operating Manual

Contents

EN2.3 MaChine intrOduCtiOnCHANNEL6,3A1.2. 3.4.8.10.5.7.9.6.1. Setup panel 'Arc Wizard P65'2. Main switch I/O – On/Off3. Signal lamp I/O – On/Off4. Warning lamp for thermal protection5. Welding cable connection - negative pole6. Welding cable connection + positive pole7. Control cable connection8. Fuse – 6,3 A delayed9. Control cable connection10. Mains power cable2.4 POsitiOning OF the MaChinePlace the machine on a sturdy, level surface that is dry and does not allow dust or otherimpurities to enter the machines cooling air flow. Preferably site the machine to a suitablecarriage unit so it is above floor level.Notes for positioning the machine• The surface inclination may not exceed 15 degrees.• Ensure the free circulation of the cooling air. There must be at least 20 cm of free space infront of and behind the machine for cooling air circulation.• Protect the machine against heavy rain and direct sunshine.The machine is not allowed to be operated in the rain as the protection class of the machine,IP23S, allows preserving and storing outside only.NOTE! Never aim the spray of sparks from a grinding machine toward the equipment.5FastMig Pulse 350, 450 / © Kemppi Oy / 1110