Kemppi FastMig MXF65 Operating Manual

Also see for MXF 65: Operating manual Quick guide Operating instructions

Kemppi FastMig MXF65 Operating Manual Manual pdf 19 page image

ENpF65 panel ButtOn FunCtiOns5.1. 3.2. 4.5. 6. 7. 8. 9.10.11.On / OFF ButtOn5.11.Short Press: Panel returns to default display.Long Press: When Welding panel (PF65) is ON => Welding panel is turned OFF. When Weldingpanel (PF65) OFF => welding panel is turned ON and Setup Panel (P65) turns ON and selectsautomatically that Welding Panel (WF#).dynaMiCs ButtOn5.22.Short Press: Dynamics setting if welding process is MIG/Synergic MIG. ArcForce setting ifwelding process is MMA. Forming Pulse setting if welding process is Wise-Root/WiseThin.Long Press: Wire Feeder number selection (WF#). If more than one Wire Feeder is connected tosystem WF number selection must be made. Every Wire Feeer must be different WF number.gas test ButtOn5.33.Gas Test function.Pressing the button will show the gas test time. Gas test time can be adjusted by using thepulse encoder.Gas test will proceed after time adjustment is complete (short delay).Gas test can be stopped by pressing any button.17FastMig MXF65, 67 / © Kemppi Oy / 0920