Kemppi FastMig MXF65 Operating Manual

Also see for MXF 65: Operating manual Quick guide Operating instructions

Kemppi FastMig MXF65 Operating Manual Manual pdf 22 page image

ENpF65 panel OvervieW5.129. 13.10.11. 12.7.8.1. 4.3. 5.2. 6.Main switch (long press)1.a) Wire feed speed/welding current display2.b) Display of selected adjustable parametera) Activation of MIG welding dynamics / Arc Force adjustment3.b) Selection of Wire Feeder (= paralleled wire feeders)Gas purge4.Wire inch5.a) Display of welding voltage /plate thickness /timer settings6.b) Display of selected adjustable parameterSelection of MIG gun trigger function: 2T/4T/MATCHLOG long press *)7.Display of welding process: MIG, 1-MIG, PULSE, DOUBLE PULSE, WISE *)8.a) Selection of additional MIG functions9.b) Activation of MMA welding process (long press*)a) Adjustment of wire feed speed10.b) Adjustment of welding power (Synergic 1-MIG and PULSE)c) Adjustment of electrode welding (MMA) current *)d) Adjustment of additional parameters when selected (ie Wire inch, Gas Test)Memory channels 0-9, programming through P65 panel on the power source, panel lock11.(long press on +)a) Adjustment of welding voltage12.b) Adjustment of length of welding arc (Synergic 1-MIG and PULSE)c) Adjustment of additional parameters when selected (ie MIG Dynamics)Panel control/remote control unit selection, channel remote control (long press)13.*) Not included on standard delivery, see chapter 6: Ordering numbersautomatic Weld data display:Last recorded welding values are displayed post welding. See power source panel P65.SelectMENU and then Weld Data.20FastMig MXF65, 67 / © Kemppi Oy / 0920I