EN1.2 About HiArc product seriesKemppi’s HiArc M 350A/M 500A products are inverter MIG/MAG welding power sources to beused in a 3-phase mains power supply.These MIG/MAG power sources can be used with various wire feeders. However, it isrecommended to use Kemppi’s HF10 wire feeder unit, which has been designed especially foruse with your HiArc power source.The HiArc power sources are equipped with Automatic adjustment features. This means thatyou can use either manual mode or Automatic mode when adjusting the welding parameters.In Automatic mode, the HiArc chooses automatically the suitable preset welding parametersaccording to your wire and gas selections.Enjoy welding with your Kemppi product!HiArc M 350A, M 500A4

Kemppi HiArc M 350A Operating Manual