Kemppi KempArc Pulse 350 Operating Manual

Also see for 450: Operating manual

EN4.4 KF 62 pAnEl oVErVIEwPOWERWISEPULSECHANNEL1-MIGSAVEROBOTPANELCONTROLMIGDOUBLEPULSEUA sVm/minmmKF 62W004330+ / –12. 13.11.9. 7.1. 4.3. 5.2. 6.8. 10.1. main switch (long press)2. a) Wire feed speed/welding current displayb) Display of selected adjustable parametre3. activation of mig welding dynamics / arc Force adjustment4. gas purge5. Wire inch6. a) Display of welding voltage /plate thickness /timer settingsb) Display of selected adjustable parametre7. Display of welding process: mig, 1-mig, pulSe, DOuBle pulSe, WiSe *)8. a) adjustment of wire feed speedb) adjustment of welding power (Synergic 1-mig and pulSe)c) adjustment of additional parametres when selected (ie Wire inch, gas test)9. memory channels 0 – 99, programming through K 60 panel on the power source10. a) adjustment of welding voltageb) adjustment of length of welding arc (Synergic 1-mig and pulSe)c) adjustment of additional parametres when selected (ie mig Dynamics)11. a) Save adjusted parametresb) panel lock, long press12. CrateFill and HotStart function activation13. Control panel: Show where welding parametres come from (robot/panel)*) not included on standard delivery.in normal mig welding, the wire feed speed and welding voltage are adjusted separately.unlike the above, the 1-mig and Wiseroot and Wisethin processes are synergetic weldingprocesses where the welding voltage and other welding parametres are interconnected sothat the welding power and arc length are adjusted to attain optimal welding values.Automatic weld data display:last recorded welding values are displayed post welding. See power source panel K 60.Selectmenu and then Weld Data.19Kemparc pulse 350, 450 / © Kemppi Oy / 1044