Kemppi KempArc Pulse 350 Operating Manual

Also see for 450: Operating manual

EN5. KF 62 pAnEl Button FunCtIonsPOWERWISEPULSECHANNEL1-MIGSAVEROBOTPANELCONTROLMIGDOUBLEPULSEUA sVm/minmmKF 62W004330+ / –the control panel is used for controlling and monitoring the operation of the power sourceand the wire feeder. the buttons are used for adjusting functions. the displays and indicatorsreflect the operating modes of the machine.displays• the control panel displays show adjustable operation parametres, their values, and theunits of measure.• During welding, display 2 shows the welding current value that is currently in use, whiledisplay 6 shows the welding voltage.Control knobs• the left-hand control knob allows the adjustment of the speed of wire feeding. theselected speed is shown on the display on the left-hand side.• the right-hand side control knob allows for controlling the welding voltage in mig and1-mig processes, in which case the selected voltage is shown on the right-hand sidedisplay, and the base current in Wiseroot-a and Wisethin-a processes, in which case theadjustment range is +/- 50.these control knobs are also used for specifying the operating parametres. a parametre foradjustment is selected with the left-hand knob, while the value of the parametre is selectedwith the right-hand knob.5.1 on / oFF Button1.Short press: panel returns to default display.long press: When Welding panel (KF 62) is On => Welding panel is turned OFF. When Weldingpanel (KF 62) OFF => welding panel is turned On and Setup panel (K 60) turns On and selectsautomatically that Welding panel (WF#).20Kemparc pulse 350, 450 / © Kemppi Oy / 1044