Kemppi MXF 63 Operating Manual
Also see for MXF 63: Quick guideOperating instructions
                                | |
Contents
| 
EN3. COntrOl panel OperatiOnsMXF wire feeders can be connected to either FastMig Pulse or FastMig KMS power sources.PF 63 and PF 65 control panel is compatible with FastMig Pulse and SF 53W and SF 54 orSF 51 and SF 52W panels enable compatibility with FastMig KMS KMS power sources.3.1 Connecting and mountingFasten the ribbon cable connector from the MXF wire feed unit to the control panel. Attachthe yellow-green earth lead into the fork connector on the PF panel.mXf 651. 2.1. Place the bottom edge of the panel behind the securing clips on the machine. Remove thefixing pin from the top edge with, for example, a screwdriver. Then gently push theupper part of the panel into place. Make sure that the cables do not get damaged,continue gently pushing the upper part of the panel until it clips into place.2. Finally secure the panel into place with the additional black plastic security clip provided(MXF 65 only). Ensure that the clip is positioned correctly. You will notice that the clipdoes not seat snuggly if its positioned upside down.15© Kemppi Oy / 1336 |
Related manuals for Kemppi MXF 63
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine