Kemppi MXF 63 Operating Manual

Also see for MXF 63: Quick guide Operating instructions

Kemppi MXF 63 Operating Manual Manual pdf 23 page image

EN5.12 pf 63 and pf 65 control panelW003712PF 659. 13.10.11. 12.7.8.1. 4.3. 5.2. 6.1. Main switch (long press)2. a) Wire feed speed/welding current displayb) Display of selected adjustable parameter3. a) Activation of MIG welding dynamics / Arc Force adjustmentb) Selection of Wire Feeder (= paralleled wire feeders)4. Gas purge5. Wire inch6. a) Display of welding voltage /plate thickness /timer settingsb) Display of selected adjustable parameter7. Selection of MIG gun trigger function: 2T/4T/MATCHLOG long press *)8. Display of welding process: MIG, 1-MIG, PULSE, DOUBLE PULSE, WISE *)9. a) Selection of additional MIG functionsb) Activation of MMA welding process (long press*)10. a) Adjustment of wire feed speedb) Adjustment of welding power (Synergic 1-MIG and PULSE)c) Adjustment of electrode welding (MMA) current *)d) Adjustment of additional parameters when selected (ie Wire inch, Gas Test)11. Memory channels 0 – 9, programming through P65 panel on the power source, panellock (long press on +)12. a) Adjustment of welding voltageb) Adjustment of length of welding arc (Synergic 1-MIG and PULSE)c) Adjustment of additional parameters when selected (ie MIG Dynamics)13. Panel control/remote control unit selection, channel remote control (long press)*) Not included on standard delivery, see chapter Ordering numbersautomatic Weld Data display:Last recorded welding values are displayed post welding. See power source panel P65. SelectMENU and then Weld Data.21© Kemppi Oy / 1336