MinarcMig™ Adaptive 15020 © Kemppi Oy 0550EN7. TERMS OF GUARANTEEKemppi Oy provides a guarantee for products manufactured and sold by themif defects in manufacture and materials occur. Guarantee repairs must be carriedout only by an Authorised Kemppi Service Agent. Packing, freight and insurancecosts to be paid by orderer.The guarantee is effected on the date of purchase. Verbal promises which do notcomply with the terms of guarantee are not binding on guarantor.Limitations on guaranteeThe following conditions are not covered under the terms of guarantee: defectsdue to natural wear and tear, non-compliance with operating and maintenanceinstructions, connection to incorrect or faulty supply voltage (including voltagesurges outside equipment spec.), incorrect gas pressure, overloading, transportor storage damage, fire or damage due to natural causes i.e. lightning or flooding.This guarantee does not cover direct or indirect travelling costs, daily allowancesor accommodation.Under the terms of guarantee, welding torches and their consumables, feederdrive rolls and feeder guide tubes are not covered.Direct or indirect damage due to a defective product is not covered under theguarantee.The guarantee is void if changes are made to the product without approval of themanufacturer, or if repairs are carried out using non-approved spare parts.The guarantee is also void if repairs are carried out by non-authorised agents.Undertaking guarantee repairsGuarantee defects must be informed to Kemppi or authorised Kemppi ServiceAgents within the guarantee period.Before any guarantee work is undertaken, the customer must provide proof ofguarantee or proof of purchase , and serial number of the equipment in order tovalidate the guarantee. The parts replaced under the terns of guarantee remainthe property of Kemppi.Following the guarantee repair, the guarantee of the machine or equipment,repaired or replaced, will be continued to the end of the original guaranteeperiod.