Kemppi MinarcMig Adaptive 150 Operation Instructions Manual

Contents

MinarcMig™ Adaptive 150© Kemppi Oy 0550 5ENNOTE! Fire caused by sparks may brake out even after several hours!CAUTION! Welding in inflammable and explosive sites is strictlyforbidden!2.4. SUPPLY VOLTAGE• Do not take the welding machine inside a workpiece, for example in to acontainer or a car.• Do not place the welding machine on a wet surface.• Change faulty cables immediately for they are life-threatening and maycause a fire.• Ensure that cables are not squeezed or in contact with sharp edges or a hotworkpiece.2.5. WELDING CIRCUIT• Insulate yourself from the welding circuit by using dry and undamagedprotective clothing.• Do not work on a wet surface.• Do not use damaged welding cables.• Do not place the welding gun or earthing clamp on the welding machine orother electrical device.2.6. WELDING FUMESMake sure ventilation is sufficient. Take special precautions when weldingmetals containing lead, cadmium, zinc, mercury or beryllium.Supply of sufficient clean air can also be ensured with the use of a fresh airmask.