10 Before you beginDNSSet the primary and the secondary DNS server addresses on the Configure > Router> DNS Client page. Also set the DNS search domain name.❏ Primary DNS server _____._____._____._____ 0.0.0.0❏ Secondary DNS server _____._____._____._____ 0.0.0.0❏ DNS Search Domain _____________________ NOTEOnly one DNS server can be entered at a time. Always enter the IP address of theprimary DNS server first, the secondary DNS server second, and so forth.Default GatewayTo set the default gateway and the IP interface, go to the Default Route section of theConfigure > Router > Routes page, and select Add.❏ Gateway IP Address _____._____._____._____ 0.0.0.0❏ Gateway Interface iplan ipwan Administrative passwordThe default user name when logging into the router is “admin.” No default passwordis assigned to this user. The password should be set to restrict access to authorizedusers. To enter a new password, go to Configure > System > Users and clickPassword in the table.The password may be up to 16 characters long and consist of letters, digits, and anyof the following characters: `~!@#$%^&*()_+-={}[]:;<>?,./❏ Password _____________________ Date and TimeThe router can derive the date and time automatically by polling SNTP servers, oryou can enter the date and time manually.To set up automatic polling of SNTP servers, navigate to the Configure > System >Time > SNTP Server page, and click add to identify each SNTP server the routerwill poll. Enter the following:❏ SNTP server _____._____._____._____ 0.0.0.0Otherwise, navigate to the Configure > System > Time > Set Date and Time page toset the router’s clock manually.Remote access (optional)If the network administrator requires remote management access to the router fromthe WAN or via the optional modem, set the parameters as required in the untrustedsection of the Configure > System > Management Access page.
