Kenwood C-V351 Instruction Manual

Also see for C-V301: Service manual Service manual

Contents

Kenwood C-V351 Instruction Manual Manual pdf 11 page image

11C-V351/C-V301 (EN)Setup of the Graphical Remote Control (GRC) unit (For C-V351)Controls and indicators(Optional with the C-V301)Approximate operating rangeRemote sensor Infrared remote controlGRC or RCInfrared ray system1. The supplied batteries are intended for use in operation check.Therefore, their lives may be shorter than ordinary batteries.2. When the remote-controllable distance gets shorter thanbefore, replace all four batteries with new ones.3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote sen-sor. In such a case, change the system installation position toprevent the malfunction.4. The GRC display may show erroneous information when theGRC unit is operated from outside the specified range.NotesNotesFor C-V351NoteNoteThe Graphical Remote Control (GRC) unit provided with the AV CONTROL CENTER can also control KENWOOD cassette decks,CD player, DVD player and LD player which are connected to it through system control cords. For details of the controllablefunctions, refer to the instruction manuals of these components.Model:GRC-151Infrared systemPerform “Model Type Setup”of the GRC before using it.The following menu screenappears immediately afterthe batteries have beenloaded for the first time.Segment screenMenu screen Operation keys1 Segment screenThis area displays the fixed icons.2 Return iconSelect to return to the previousdisplay.3 Main Menu iconSelect to change the input sourceor select Main Menu 2.4 Confirm iconSelect to confirm a setting, etc.5 Sound iconSelect to control the sound-relatedfunctions.6 DVD iconSelect to control the DVD player.7 CD iconSelect to control the CD player.8 MD iconSelect to control the MD recorder.9 Tuner iconSelect to control the tuner.0 LD iconSelect to control the LD player.! Tape A iconSelect to control cassette deck A.@ Tape 1 iconSelect to control cassette deck 1.# Tape B iconSelect to control cassette deck B.$ Cable TV iconSelect to control the cable TV.% TV iconSelect to control the TV.^ VCR 1 iconSelect to control VCR 1.& Satellite Tuner iconSelect to control the satellite tuner.* VCR 2 iconSelect to control VCR 2.( Set Up iconSelect to make setup operations.) Menu screenThis area displays thecontrol key icons andlevel information.¡ Mode displayThe above illustrationindicates the Setupmode.™ CD iconSelect to set up theCD player.£ Reset iconSelect to return to the“Model Type Setup”menu screen.¢ Joystick keyFor use in selecting icons.The joystick moves in 8 direc-tions.∞ ENTER keyPress to enter a selection.§ VOLUME (UP) control keyPress to increase the volumelevel.¶ VOLUME (DOWN) controlkeyPress to decrease the volumelevel.• MUTE keyPress to mute sound temporarily.ª (ON/STANDBY) keyPress to switch the AV CONTROLCENTER and the componentsconnected to it through systemcontrol cords between ON andSTANDBY.÷ The input source can be selectedusing icon 3.÷ Icons 6 to * are used to select thecomponent to be controlled.The displayed icons are variable depending on the “ModelType Setup” for matching the specifications with the AVCONTROL CENTER which uses the GRC unit and “Setup” formatching the specifications with connected source compo-nent.Model Type SetupModel 6Model 5Model 4Model 3Model 2Model 1ON/STANDBYMUTEVOLUMEENTERSetupDVDSoundC DSat.Tape1CableResetVCR1VCR2L DM DT VConfirm Set UpReturnTapeA TapeBTape1LDTunerCD VCR2VCR1TVSat.CableMDMainMenuDVD§¶•£ª)™12 3 4 5 6 7 8 9 0 ! @ # $ % ^ & * ( ¢ ∞¡30°5m30°