Kenwood C-V351 Instruction Manual

Also see for C-V301: Service manual Service manual

Contents

Kenwood C-V351 Instruction Manual Manual pdf 22 page image

22C-V351/C-V301 (EN)AV CONTROL CERTER KC-212INPUT4VOLUME CONTROLDOWN UPON/STANDBY3ENTERENTERVOLUMEC DCDENTERENTERON/STANDBYPlaying musicThe following procedure allows to play a CD, MD, DVD orcassette tape.Preparations÷ Connect components as described in “System connection”.5÷ Complete “Setup of the Graphical Remote Control (GRC) unit”.!: Keys or controls to be used in this operationPress the ON/STANDBY key to ON.Select the input source.Play the selected source.Operation on eachsource compo-nentAdjust the volume.TodecreasevolumeToincreasevolumeTo decrease volumeTo increase volume1 VCR2 AUX3 TAPE 1 / MD *14 TUNER (frequency display)5 CD6 LD / DVD *27 6ch INPUTWith the main unit operation, the input sources are switched as shown below.*1: To change the TAPE 1 display to MD display*2: To change the LD display to the DVD displayTo enable system-control operation, the displayed information shouldbe set according to the actually connected components. 0÷ Note for using the 6ch INPUT ∞÷ Step 3 can be omitted if the easy operation feature is available. ¡One-touch operationPressing the play key of the CD player, DVD player or cassette deckstarts up the system automatically and starts playback. When thisoperation is used, steps 1 and 2 can be omitted. ¡Volume level is displayed.÷ The time taken till the volume level is displayed is variable dependingon the current operating condition.÷ Rotating the VOLUME CONTROL at a higher speed increases theamount of volume change (AI VOLUME function).÷ The sound of input source cannot be listened to while TAPE 2(MONITOR) is ON.dBV O L U M E - 5 )÷ Load the CD player, MD recorder, DVD player or cassette deck withthe software to be played.\Read the instruction manuals of the associated components.POWERINPUT6%fiVOLUMETo decrease volumeTo increase volumeMain unit GRCRCMain unit GRCRCMain unit GRCRCMain unit GRCRCMainMenu