Kenwood C-V751 Instruction Manual

Also see for C-V751: Service manual

Contents

15Setup of the Graphical Remote Control (GRC) unitIn the operations of the GRC (Graphical RemoteControl unit), proceed to each step within 10seconds after the previous step.The display disappears in 10 seconds.To resume GRC display, move the Joy-stick in any directions.Setting up the GRC according to other components (Set Up)In the initial condition, the setup codes for CD, MD and DVDhave already been pre-registered. The GRC can also be usedto remote control other components which are not con-nected through system control cords.Registering setup codes for VIDEO 1Enter the setup code.1 Select the ”SET UP“ icon.12 Select the ”Preference“ icon.3 Press the ”IR“ icon.4 Press the ”Input“ icon to open the list of available jacksets.5 Press the “Device” icon to select the type of device youhave connected to the jack set.6 Press the “Brand” icon to select the device’s brand.Continued to next page1 CD2 MD/TAPE 13 VIDEO 14 VIDEO 25 DVD/DVD 6CH6 TV 17 TV 28 TAPE 2/MONI.Select the icon with or .1 CD2 TAPE3 MD4 VCR5 CABLE6 SATELLITE7 TV8 LD9 DVD0 NothingSelect the icon with or .