Kenwood C-V751 Instruction Manual

Also see for C-V751: Service manual

Contents

28Sound adjustmentPHONESVOLUME CONTROLDOWN UPTo listen through headphones1 Plug headphones.2 Adjust the volume.TodecreasevolumeToincreasevolume÷ The speaker sound is defeated at the moment headphones areinserted into the PHONES jack.÷ If headphones are plugged in during surround play, its mode isautomatically switched to the STEREO mode.If they are plugged in during DVD 6ch INPUT play, only the front L chand R ch will be played.The previous status resumes at the moment headphones are un-plugged.÷ If headphones are plugged in during test tone output, the test toneoutput stops.Main unit GRCTo decrease volumeTo increase volumeVOLUME UPDOWNTo mute sound temporarilyBlinksGRCF MLWMWAUTO STEREOMEMO.TUNEDMUTERDS EON TPPTY TA NEWSCLIPA MTo cancelPress the MUTE key again.Main unitPlaying musicNotes for using the CD, DVD or DVD 6ch INPUT sourceWhen CD, DVD or DVD 6ch INPUT is selected as the input source, the operation is subjected to the following restrictions.1. The monitor function cannot be activated by pressing the TAPE 2/MONITOR key.2. The Listen mode operations are not available.Restrictions with DVD 6ch INPUT (except with the ANALOG input) :Restrictions with CD and DVD:1. When the input is a digital signal, the TAPE2/MONITOR function cannot be used.÷ The speaker setting is not available with DVD 6ch INPUT.÷ The sound adjustment is not available with DVD 6ch INPUT.÷ When DVD 6ch INPUT is selected, all the speaker levels become 0 dB so the levels should be set on the source component.Regarding TAPE 2/MONITORA cassette deck or graphic equalizer can be connected to this unit’s TAPE 2/MONITOR terminals. If you connect a graphic equalizer, turn theTAPE 2/MONITOR key ON. If you connect a 3-head cassette deck, you can monitor the source sound, or the sound being recorded, while recording.Pressing the TAPE 2/MONITOR key lets you compare the recorded sound and the source sound. Refer to the operating manual for the component youconnected for further details.MUTE