Kenwood C-V751 Instruction Manual

Also see for C-V751: Service manual

Contents

8System connectionSYSTEMCONTROLSYSTEMCONTROLSYSTEMCONTROLANTENNA AMFM 75ΩGNDCONNECT WITHPOWER AMPLIFIERUNSWITCHEDSYSTEMCONTROLLRWhen this unit is connected to KENWOOD audio component system “SERIES 21”, also connect them through the system control cordsto allow system-control operations between components.AVCONTROLCENTERPOWERAMPLIFIERMD recorderCDPLAYERConnection exampleThe SERIES 21 components which can besystem-connected with this unit includethe LD player, MD recorder and DVD player.Inserting the connectorPush and hold the two ends of theconnector, and pull it straightoutward.Connection of flat-cable connectorPush in theconnector straightinto the socket until itclicks to indicate thelocking.Systemcontrol cordSystemcontrol cordRemoving the connectorAbout the system control connections1. Do not connect the SERIES 21 componentsto other system components using systemcontrol cords.2. Do not connect system control cords to anycomponents other than those specified byKENWOOD. It may cause a malfunction anddamage your equipment.3. Be sure the system control plugs are in-serted all the way in to the system controlterminals.About the system control operations(Available operations when SERIES 21 components are connected through system control cords)Remote Control *Lets you operate source components with the system remote supplied with this unit.Automatic Operation ™When you start playback from a source component, the input selector on this unit switches to that component automatically. (Except TAPE 2)Synchronized Recording ⁄Lets you synchronize recording with the start of playback when recording from CD etc.1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unpluggingconnection cords without removal of the power cord can cause malfunctions or damage to the unit.3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.4. If the system control cords or audio cords are not connected properly, the remote control or automatic operation between systemcomponents will not work properly.NotesNotesNotesNotesNotesNotesSystemcontrol cordGRAPHICEQUALIZER