Kenwood DDX6016BTR Instruction Manual

Also see for DDX4016BT: Instruction manual

ENGLISH 47SETTINGSSETTINGS❏ Setting the speakers—car type,speaker size and crossover frequencyPreparation:Select the appropriate crossover network modebeforehand. (Page 46)1 Display the screen.On the Home screen:2 Select a car type (1), select the locationof the speakers (2)* 1, then display the screen (3).3 Select the speaker type (1), select the sizeof the selected speaker (2), then displaythe screen (3).• When a speaker is not connected, select.• When setting the front speakers, also selectthe speaker size for .4 Adjust the crossover frequency of theselected speaker./Adjusts the output volume ofthe tweeter (left/right).*2*3 Adjusts the crossoverfrequency for the tweeter.*2*3 Adjusts the output volume ofthe selected speaker. Adjusts the crossoverfrequency for the front or rearspeakers (high pass filter).*4 Adjusts the crossover for thesubwoofer (low pass filter).*5 Adjusts the crossover slope.*6 Selects the phase for thesubwoofer.*5*1 Speaker location selection is available only when Network> is set to [2 way]. (Page 46)* 2 Appears only when the front speakers are selected.* 3 Adjustable only when is set to ,, or on the screen.*4 Appears only when the front/tweeter or rear/mid range speakersare selected.* 5 When is set to [2 way] (Page 46):Appears only when the subwoofer is selected.*6 Not adjustable when or is set to.