ENGLISH 69No operations are available when playing back atrack containing artwork.• Operate the unit after the artwork has loaded.Videos cannot be played.• Connect with USB Audio and Video cableKCA-iP202 (optional accessory) to iPod/iPhone30-pin connector model. Other cables cannot beused.• Select [USB+AV-IN] for .(Page 22)No sound of videos comes out.• Connect with USB Audio and Video cableKCA-iP202 (optional accessory) to iPod/iPhone30-pin connector model. Other cables cannot beused.• Select [USB+AV-IN] for .(Page 22)❏ RadioAME automatic presetting does not work.• Store stations manually. (Page 26 )Static noise while listening to the radio.• Connect the aerial firmly.❏ Digital Radio (DAB) (only forDDX4016DAB)Cannot receive an ensemble.• Your area is not covered by the ensemble.The DAB aerial is not properly extended orpositioned.• Adjust the aerial and try the ensemble scanningagain.• Connect an active aerial (not supplied).❏ AV-IN“AV-IN” cannot be selected on the Home screen.• Select [USB 1 Wire] for .(Page 22)No picture appears on the screen.• Turn on the video component if it is not on.❏ BluetoothPhone sound quality is poor.• Reduce the distance between the unit and theBluetooth mobile phone.• Move the car to a place where you can get a bettersignal reception.The sound is interrupted or skipped while using aBluetooth audio player.• Reduce the distance between the unit and theBluetooth audio player.• Disconnect the device connected for Bluetoothphone.• Turn off, then turn on the unit.(When the sound is not yet restored) connect theplayer again.The connected audio player cannot becontrolled.• Check whether the connected audio playersupports AVRCP (Audio/Video Remote ControlProfile).The Bluetooth device does not detect the unit.• Search from the Bluetooth device again.The unit does not pair with the Bluetooth device.• For devices compatible with Bluetooth 2.1:Register the device using a PIN code. (Page 38)• For devices compatible with Bluetooth 2.0:Enter the same PIN code for both the unit andtarget device. If the PIN code of the device is notindicated in its instructions, try “0000” or “1234.”• Turn off, then turn on the Bluetooth device.Echo or noise occurs.• Adjust the microphone unit position.• Adjust the echo volume or noise reductionvolume. (Page 40)The unit does not respond when you try to copythe phone book to the unit.• You may have tried to copy the same entries (asstored) to the unit.REFERENCESREFERENCES
