Kenwood DDX6016BTR Instruction Manual

Also see for DDX4016BT: Instruction manual

68❏ DiscsRecordable/Rewritable discs cannot be playedback.• Insert a finalized disc.• Finalize the discs with the component which youused for recording.Tracks on the Recordable/Rewritable discscannot be skipped.• Insert a finalized disc.• Finalize the discs with the component which youused for recording.Playback does not start.• The format of files is not supported by the unit.No picture appears on the external monitor.• Connect the video cord correctly.• Select the correct input on the external monitor.DivX /MPEG1/MPEG2/MP3/WMA/WAV/AAC discscannot be played back.• Record the tracks using a compatible applicationon the appropriate discs. (Page 64)• Add appropriate extension codes to the filenames.Tracks on the Recordable/Rewritable discs arenot played back as you have intended them toplay.• Playback order may differ from the one playedback using other players.❏ USB“Reading” does not disappear from the screen.• Turn the power off and on again.While playing a track, sound is sometimesinterrupted.• The tracks are not properly copied into the USBdevice. Copy the tracks again, and try again.Tracks are not played back as you have intendedthem to play.• Playback order may differ from the one playedback using other players.❏ AndroidSound cannot be heard during playback.• Reconnect the Android device.• When is set to [HAND MODE],launch any media player application on theAndroid device and start playback.Sound output only from the Android device.• When is set to [HAND MODE],relaunch the current media player application oruse another media player application.• Restart the Android device.• If this does not solve the problem, the connectedAndroid device is unable to route the audio signalto unit.Cannot playback when is set to[BROWSE MODE].• Make sure KENWOOD Music Play APP is installedon the Android device.• Reconnect the Android device and select theappropriate control mode.• If this does not solve the problem, the connectedAndroid device does not support the BrowseMode.“NO DEVICE” or “READING” keeps flashing.• Switch off the developer options on the Androiddevice.• Reconnect the Android device.• If this does not solve the problem, the connectedAndroid device does not support the BrowseMode.❏ iPod/iPhoneNo sound comes out of the speakers.• Disconnect the iPod/iPhone, then connect it again.• Select another source, then reselect “iPod”.The iPod/iPhone does not turn on or does notwork.• Check the connecting cable and its connection.• Update the firmware version.• Charge the battery.• Reset the iPod/iPhone.Sound is distorted.• Deactivate the equalizer either on this unit or theiPod/iPhone.A lot of noise is generated.• Turn off (uncheck) “VoiceOver” on the iPod/iPhone. For details, visit .REFERENCESREFERENCES