52 English3Setting up BluetoothYou can perform general operations such as connection and initialization through <BluetoothSetup> on the <Setup> menu.Displaying the screen1 On <Top Menu>:2 menu itemsMenu items Selectable setting/item Initial: UnderlinedPaired DeviceListPress [Enter] to show the list of the registered devices. You can connect thedevice or delete the registration (☞ page 51).PIN Code Changes the PIN code of the unit.• Enter a new PIN code, then press [Enter].Device Name Shows the device name to be shown on the Bluetooth device —“KENWOOD BT MM-7U2.”Device Address Shows the device address of the unit.Auto Connect ♦ ON♦ OFF: The connection is automatically established with the lastconnected Bluetooth device when the unit is turned on.: Cancels.Bluetooth HF/AudioSelect the speakers used for Bluetooth (both phone and audio player).♦ Front Only♦ All: From front speakers only.: From all speakers.Auto Pairing ♦ ON♦ OFF: Establishes the pairing automatically with the connectediOS device (such as iPhone) even if the Bluetooth functionis deactivated on the device. (Auto pairing may not workfor some devices depending on the iOS version.): Cancels.Initialize Hold [Enter] to initialize all settings you have made for using Bluetoothmobile phone and Bluetooth audio player.Downloaded from www.vandenborre.be
