70 EnglishSymptom Remedy/CauseiPod/iPhoneNo sound comes out of thespeakers.• Disconnect the iPod/iPhone, then connect itagain.• Select another source and then reselect “iPod”.The iPod/iPhone does not turnon or does not work.• Check the connecting cable and its connection.• Update the firmware version.• Charge the battery.• Check whether the iPod/iPhone control mode iscorrectly selected. (☞ page 27)• Reset the iPod/iPhone.Sound is distorted. Deactivate the equalizer either on this unit or theiPod/iPhone.A lot of noise is generated. Turn off (uncheck) the “VoiceOver” feature of theiPod. For details, visit .No operations are availablewhen playing back a trackcontaining Artwork.Operate the unit after the Artwork is loaded. (☞page 25)Sound does not synchronizewith the video.Select <iPod> for <AV Input>. (☞ page 46)• Videos cannot be played.• No sound of videos comesout.• Connect USB Audio and Video cable KCA-iP202/KCA-iP22F. Other cables cannot be used.• Select <iPod> for <AV Input>. (☞ page 46)USB “Reading...” keeps flashing on thescreen.Turn off the power and on again.While playing a track, sound issometimes interrupted.The tracks are not properly copied into the USBdevice. Copy tracks again, and try again.Downloaded from www.vandenborre.be
