Kenwood DDX771 Instruction Manual

Also see for DDX2071: Instruction manual

Kenwood DDX771 Instruction Manual Manual pdf 32 page image

32BLUETOOTHBLUETOOTH (Only for(Only for DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/DDX3071BTDDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/DDX3071BT))Information for using Bluetooth®devicesBluetooth is a short-range wireless radiocommunication technology for mobile devices suchas mobile phones, portable PCs, and other devices.Bluetooth devices can be connected without cablesand communicate with each other.Notes• While driving, do not perform complicatedoperations such as dialing numbers, usingthe phonebook, etc. When you perform theseoperations, stop your car in a safe place.• Some Bluetooth devices may not connect to thisunit depending on the Bluetooth version of thedevice.• This unit may not work for some Bluetoothdevices.• Connecting conditions may vary depending onyour environment.• For some Bluetooth devices, the device isdisconnected when the unit is turned off.Connecting Bluetooth devices Registering a new Bluetooth deviceWhen you connect a Bluetooth device to the unit forthe first time, pair the unit and the device. Pairingallows Bluetooth devices to communicate with eachother.• The pairing method differs depending on theBluetooth version of the device.– For devices with Bluetooth 2.1: You can pair thedevice and the unit using SSP (Secure SimplePairing) which only requires confirmation.– For devices with Bluetooth 2.0: You need toenter a PIN code both on the device and unit forpairing.• Once the connection is established, it is registeredin the unit even if you reset the unit. Up to 5devices can be registered in total.• Only one device for Bluetooth phone and one forBluetooth audio can be connected at a time.• To use the Bluetooth function, you need to turn onthe Bluetooth function of the device.• To use the registered device, you need to connectthe device to the unit. (Page 34)Pairing a Bluetooth device using SSP (forBluetooth 2.1)When the Bluetooth device is compatible withBluetooth 2.1, a pairing request is sent from anavailable device.1 Search “KENWOOD BT MM-8U2” fromyour Bluetooth device.2 Confirm the request both on the deviceand the unit.• Press [Cancel] to reject the request.