40SETTINGSSETTINGSSound adjustment Using the sound equalization• The adjustment is memorized for each source untilyou adjust the sound again. If the source is a disc,the adjustment is stored for each of the followingcategories.– DVD /VCD– CD– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC• You cannot adjust the sound when the unit is instandby.Selecting a preset sound mode1 Display the screen.On the screen:2 Select a sound mode• You can change the page to display moreitems by pressing [ ]/[ ].Storing your own adjustment—Customizingpreset sound mode1 Select a sound mode. (See the left column.)2 Set to [OFF] (1), thenpress [Tone] to display the screen(2).3 Select the band (1), adjust the level(2),then adjust the subwoofer level* (3).• Repeat steps 1 and 2 to adjust the level ofother bands.The adjustments are stored and isactivated.• You can also display the screen bypressing AUD (for DDX771/DDX271/DDX2071)or by pressing and holding the Volume/ATT/AUD knob (for DDX491HD/DDX471HD/DDX371/DDX310BT/DDX3071BT) on the monitor panel.* Adjustable only when the subwoofer is activated. (Page 46)Storing your own adjustment—Adjusting thesound precisely1 Select a sound mode. (See the far leftcolumn).2 Set to [ON] (1), thenpress [Tone] to display the screen(2).3 Select the band (1), then adjust the sound(2). Changes level of Bass/Middle/Treble to 0. Selects frequency.Adjust the level.Adjusts the width of thefrequency. Activates/deactivates bass. Adjusts subwoofer level.*The adjustments are overwritten if the setting has been created (see the left column),and is activated.• To make adjustment for other bands, repeat step3.* Adjustable only when the subwoofer is activated. (Page 46)