| 
36 DNX9240BT/DDX8024BT/DDX8054BTTV WatchingSource Control ScreenSwitches to source control screen to use variousfunctions.Display the Source1 Control ScreenSee Screen> (page 14).Operation on the Source Control Screen2111[BAND] Switches to TV1 or TV2.[4], [¢] Select a channel.Use the [SEEK] to change the channel tuningsequence.[List] Display the TV Preset List screen. (page38).[ ] Switches to the TV screen.1 Information displayChannel information display"TV" Band display"Group" TV Area Group Display. See Setup> (page 80)."Preset" Memory Number Display"ch" Channel display[ ] When appears, the text display isscrolled by touching it.Multi Function[1/2] Switches the multi function display.[ ] Closes the multi function bar.[AME] Selects the Auto Memory mode.See (page 37).[SEEK] Switches the Seek mode.The mode is switched in the following ordereach time you touch the button.Display Setting"AUTO1" Tunes in a station with good reception automatically."AUTO2" Tunes in stations in memory one after another."MANU" Switches to the next frequency manually.[PRE] Lists and selects memorized station.[NAME] Sets a name to the station. See Station Name> (page 38).[P1] – [P6] When [P1] to [P6] buttons appear,you can recall channels on memory.For memory of broadcasting stations, see (page 37) or Memory> (page 37).TV Menu (only with KTC-D500E (optionalaccessory) connected)Menu Control screen appears by touching thearea shown below.Display the TV screen1See Sources> (page 16).Display the Menu Control screen2Operation on the Menu Control screen3[Menu] Shows Digital TV Broadcasting menuscreen.[EPG] Shows EPG (Electric Program Guide)screen. |
