Kenwood DDX8024BT Instruction Manual

Also see for DDX8024BT: Installation manual Installation manual

Contents

58 DNX9240BT/DDX8024BT/DDX8054BTAudio ControlPositionYou can adjust the sound effects according toyour listening position.Display the Position screen1Touch [ ] > [ ] > [Position]. (page 54)Set the Position Control2[P1] - [P3] Stores the present adjustment setupin memory, or calls it from memory.To store your adjustment in memory:Continue to touch [P1] to [P3] more than 2seconds.To call your adjustment from memory:Touch [P1] to [P3] of your adjustment youwish to call from memory.[2], [3] Sets a listening position.You can select any of "Front R" (Right front),"Front L" (Left front), "Front All" (All front), and"All" (All) positions.[DTA] Displays the Position DTA (Digital TimeAlignment) screen.Exit Position Control3⁄The final distance is adjusted to the total of Car Type Set•Up value (page 74) and Position Setup (both Position andPosition DTA) value.If you change the Car Type Set Up value• (page 74), theposition is set to "All".Only the adjusted distance of position setup (Position•and Position DTA values) is stored in memory. Therefore,the final adjustment distance changes if you change theCar Type Set Up value (page 74).Position DTA ControlYou can fine-adjust your listening position.Display the Position DTA screen1Select a speaker you wish to adjust24442221115553336661 Center speaker2 Left front speaker3 Right front speaker4 Left rear speaker5 Right rear speaker6 Subwoofer[2], [3] Finely adjusts the value set with thePosition function.[Total DTA] Indicates setup distance. Theadjusted distance (Position and PositionDTA values), and the total of the distanceadjusted by Car Type Set Up (page 74) andthe adjustment distance for position setup areindicated.Finely adjust the distance3Finely adjust the value set with the Positionfunction.