Kenwood DDX8024BT Instruction Manual

Also see for DDX8024BT: Installation manual Installation manual

Contents

64 DNX9240BT/DDX8024BT/DDX8054BTMonitor Angle ControlYou can adjust the position of the monitor.Display the Angle Setup screen1Touch [ ] > [ ] > [System] > [Angle].(page 59)Set the Monitor Angle21111 Sets the Monitor angle.[Memory] Stores the current monitor angle asthe angle during power off.EXT SW SetupSetting up power specification of the externaldevice for which the power is controlled from thisunit.Display the EXT SW Setup screen1Touch [ ] > [ ] > [System] > [EXT SW].(page 59)Perform EXT SW Setup2[SW Name] Sets the name of the externaldevice. See (page 41) forinformation on how to enter the name.[Output Pattern] Sets the power signal outputmode.( EXT SW1: Pulse, EXT SW2: Level)"Pulse": Generates a single power signal pulse."Level": Continues output of high power signal.Sets to turn output on/off each timethe button on the EXT SW Controlscreen is touched.[Pulse Set] Sets the Pulse signal output time.Outputs 500ms when "1" is set. Increases by200ms with each step. Up to 100 steps canbe set.Setup Menu