Kenwood DDX8036BT Instruction Manual

Also see for DDX7036BT: Installation manual

Contents

Kenwood DDX8036BT Instruction Manual Manual pdf 83 page image

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English 83Next page 3Next page 3Speaker SetupSpeaker SetupYou can select a speaker type and its sizeto get the best sound effects.1 Display the Speaker Select screenTouch [ ] >> [ ] >> [Audio SETUP]>> [Speaker Select]. (page 67)2 Select a speaker you wish to adjustWhen the speaker type and size areset, the speaker crossover network andequalizer curve are set automatically.222111333 4441 Center speaker (DDX8 series)2 Front speaker3 Rear speaker4 Subwoofer[Tweeter] You can set the tweeter whenyou are selecting front speakers.If you are using a tweeter together withthe front speakers, set the tweeter to"ON". In the "ON" position, the Equalizeris adjusted to its best position.[X'over] Displays the Speaker CrossoverSetup screen.You can adjust the crossover setupthat was set automatically when youselected the speaker type.3 Select a speaker typeYou can select any of the followingspeaker types."Center" None, 40x70 mm, 5 cm, 10 cm,13 cm, 16 cm over"Front" OEM, 10 cm, 13 cm, 16 cm, 17cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10"Rear" None, OEM, 10 cm, 13 cm, 16 cm,17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10"Subwoofer" None, 16 cm, 20 cm, 25cm, 30 cm, 38 cm over⁄• Select "None" if you have no speakers.• If you set the center speaker to "None" even ina short time when you are setting the SurroundControl to "Bypass+Center", the Surround Controlis set to "Bypass" automatically. See Control> (page 66).• If you set the center and rear speakers to "None"when you are setting the Surround Controlto "Dolby PL II", the Surround Control is set to"Bypass" automatically. See (page 66).Crossover Network SetupYou can set a crossover frequency ofspeakers.1 Select the speaker to set thecrossover222111333 4441 Sets the High Pass Filter of the centerspeaker. (DDX8 series)2 Sets the High Pass Filter of the frontspeaker.3 Sets the High Pass Filter of the rearspeaker.4 Sets the Low Pass Filter of thesubwoofer.