84 DNX series DNX7360BT/ DNX7360BTMSetup Menu2 Display the Crossover setup screen3 Set the crossover[Phase] Sets the phase of subwooferoutput.The phase is reversed 180 degreeswhen set to "Reverse". (Only when"Subwoofer" is set to any item otherthan "None" in Speaker Setup)[HPF FREQ] High Pass Filter adjustment.(When front, center or rear speaker isselected on Speaker Select screen)[LPF FREQ] Low Pass Filter adjustment.(When Subwoofer is selected onSpeaker Select screen)[Slope] Sets a crossover slope.Car Type (DTA) SetupCar Type (DTA) SetupYou can setup the car type and speakernetwork, etc.1 Display the Car Type Setup screenTouch [ ] >> [ ] >> [Audio SETUP]>> [Car Type]. (page 67)2 Setup the Car TypeIf your car type is selected, the DigitalTime Alignment and Equalizer is setautomatically (for timing adjustment ofsound output for each channel) to havethe highest surround effects.1111 Sets up the car type you use togetherwith this unit.You can choose according to type ofyour car."OFF", "Compact", "Full Size Car","Wagon", "Minivan", "SUV", "Minivan(Long)"[Location] Sets the locations of thespeakers.[Adjust] Displays the Car Type Adjustscreen.You can adjust the digital timealignment that was set automaticallywhen you selected the car type.Speaker Location setup1 Display the Speaker Location Setupscreen
