Kenwood DDX8901HD Instruction Manual

ENGLISH 17iPod/iPhoneBluetooth connectionPair the iPod/iPhone through Bluetooth. (Page 36)• For iPhone 5/iPod touch (5th Generation)/iPodnano (7th Generation): To watch the video,connect your iPod/iPhone to HDMI/MHL inputterminal using KCA-HD100 (optional accessory).(Page63)• For iPod/iPhone except for iPhone 5/iPod touch(5th Generation)/iPod nano (7th Generation):You cannot watch the video with Bluetoothconnection.R Selecting the iPod/iPhone device toplay and connection methodWhen connecting the iPod/iPhone device forfirst time, the setup screen (for connection, etc.)appears. Follow the procedure on the setup screento configure the settings.1 Display the screen.On the screen:• If [Enter] for cannot beselected, put the unit in standby. (Page 7)2• If you do not need to change the setting,press [OK] to exit from the setup screen.3 Select the connection method (1), thenpress [Next] (2).AV-IN>Select this when the iPod/iPhone is connected usingKCA-iP202 (optional accessory). Select this when the iPod/iPhone is connected usingKCA-iP102 or USB 2.0 cable(accessory of the iPod/iPhone).Bluetooth>Select this when the iPod/iPhone is connected usingHDMI cable KCA-HD100(optional accessory) and USB2.0 cable (accessory of the iPod/iPhone) through Lightning-Digital AV adapter (accessory ofthe iPod/iPhone). Select this when the iPod/iPhone is connected viaBluetooth.• When selecting or Wire>, go to step 5.4 When selecting or as the connection method,the device selection screen appears.Search for the available iPod/iPhonedevices (1), then select the target devicefrom the list (2).• You can change the page to display moreitems by pressing [J]/[K].• If the device is already listed, skip the step 1.• To stop searching, press [Cancel].5 Confirm the settings.