Kenwood DDX8901HD Instruction Manual

44SETTINGSSettings for using applications ofthe iPod/iPhone/AndroidBefore using applications of the iPod/iPhone/Android such as Pandora or iHeartRADIO, select thedevice to use and connection method.When connecting the device for first time, thesetup screen (for connection, etc.) appears. Followthe procedure on the setup screen to configurethe settings.1 Pair the iPod/iPhone/Android devicethrough Bluetooth. (Page 36)2 Display the screen.On the screen:• If [Enter] for cannot beselected, put the unit in standby. (Page 7)3 Display the screen.4• If you do not need to change the setting,press [OK] to exit from the setup screen.5 Select the device type (1), then press[Next] (2).6 Select the connection method (1), thenpress [Next] (2).For Android:+ Bluetooth>Select this when the Androidis connected both by cable toHDMI/MHL input terminal andvia Bluetooth. Select this when the device isconnected via Bluetooth.For iPod/iPhone:AV-IN>Select this when the iPod/iPhone is connected usingKCA-iP202 (optional accessory). Select this when the iPod/iPhone is connected using USB2.0 cable (accessory of the iPod/iPhone).Bluetooth>Select this when the iPod/iPhone is connected usingHDMI cable KCA-HD100(optional accessory) and USB2.0 cable (accessory of the iPod/iPhone) through Lightning-Digital AV adapter (accessory ofthe iPod/iPhone). Select this when the iPod/iPhone is connected viaBluetooth.• When selecting or Wire>, go to step 8.7 When selecting or as the connection method,the device selection screen appears.Search for the available iPod/iPhonedevices (1), select the target device fromthe list (2), then press [Next].• You can change the page to display moreitems by pressing [J]/[K].• If the device is already listed, skip the step 1.• To stop searching, press [Cancel].8 Confirm the settings.