Kenwood DNN9350BT Instruction Manual

Also see for DNN9350BT: Quick start guide Instruction manual

Contents

112Return to the Top pageSetting UpLanguage setup1 Touch [SET] of [Language] in the UserInterface screen.Language Setting screen appears.2 Set each item as follows.GUI Language SelectSelect the language used for the GUI and inputmethods.Navigation Language Select(DNN9350BT/ DNN9350BTM)Select the language used for navigation.STTSelect the language used for Speech to Text(STT).TTSSelect the language used for Text to Speech(TTS).3 Touch [Enter].NOTE• To cancel the language setup, touch [Cancel].Learning function of steering remoteThis function is available only when yourvehicle is equipped with the electricalsteering remote controller.If your steering remote controller is notcompliant, learning may not be completedand error message may appear.1 Touch [SET] of [Steering RemoteController] in the User Interface screen.Steering Remote Controller Setting screenappears.2 Press the steering remote controllerbutton you want to set the function.NOTE• You can have the unit learned all buttons at atime. In that case, press the all buttons one at atime and after pressing all of them, touch [Done]in Steering Remote Controller Setting screen.However, new functions cannot be learned afterthis operation.3 Touch the function you want to set.4 Repeat steps 2 and 3 as necessary.5 Touch [Done].NOTE• When changing the function already learned,touch the button you want to change in step 2and then touch to select the changed functionfrom the function list.• Confirm the contents of the settable function onthe function list. You cannot edit the function list.• To initialize the contents, touch [Initialize] of[Steering Remote Controller] in User Interfacescreen. After you touch [Initialize], a confirmationmessage appears. Follow the message andcomplete the operation.