Kenwood DNN990HD Quick Start Manual

Also see for DNN770HD: Instruction manual Instruction manual

EN 9DNN990HD/ DNN770HDEXT SW (DNN990HD only)Control the external devices.After setting, touch [ ].CameraSet the parameters for the camera.After setting, touch [ ].Demo modeSet the demonstration mode. Default is “ON”.4 Touch [Finish].NOTE• For details on operations of each setting,refer to the Instruction Manual.5 Touch [Administrator].How to prepare the remotecontrolInsert two “AAA”/“R03”-size batterieswith the and poles alignedproperly, following the illustrationinside the case.CAUTION• Put the remote controller in a place whereit will not move during braking or otheroperations. A dangerous situation couldresult, if the remote controller falls downand gets wedged under the pedals whiledriving.• Do not leave the battery near fire orunder direct sunlight. A fire, explosion orexcessive heat generation may result.• Do not recharge, short, break up orheat the battery or place it in an openfire. Such actions may cause the batteryto leak fluid. If spilled fluid comes incontact with your eyes or on clothing,immediately rinse with water and consulta physician.• Place the battery out of reach of children.In the unlikely event that a child swallowsthe battery, immediately consult aphysician.