8282Return to the Top pageAudio Setting Up3 Select a speaker size using [2] and[3]. The speaker size is differentdepending on the speaker type andthe unit.FrontOEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4 inch, 7inch, 4x6, 5x7, 6x8, 6x9, 7x10RearNone, OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10SubwooferNone, 6 1/2 inch, 8 inch, 10 inch, 12 inch, 15inch overNOTE• Select “None” if you have no speakers.FrontStandard, Wide, Middle, NarrowCrossover network setupYou can set a crossover frequency ofspeakers.1 Touch the speaker to set the crossoverin the Speaker Select screen.2 Touch [X’over].X’over screen appears.3 Set each item as follows.Phase*Sets the phase of subwoofer output.The phase is reversed 180 degrees when set to“Reverse.”HPF FREQHigh Pass Filter adjustment. (When front or rearspeaker is selected on Speaker Select screen)LPF FREQLow Pass Filter adjustment. (When subwooferis selected on Speaker Select screen)SlopeSets a crossover slope.* This function is available in the specificsituation.Only when “Subwoofer” is set to“ON” in “Speaker Setup”.Only when “Subwoofer” isset to “ON” in “Speaker Setup” and “LPFFREQ” is set to other than “Through”.
