Kenwood DNX6040EX Instruction Manual

Also see for DNX5180: Service manual Brochure & specs Instruction manual Quick start guide Quick start guide

Contents

8888Return to the Top pageAudio Setting UpNOTE• When the rear speaker sound is switched, theaudio source that is output at the AV OUTPUTterminal is also switched to the same source.• When the dual zone function is set to on, thefollowing functions are not available.• Output from the subwoofer• Subwoofer Level/Bass Boost (P.85)• Equalizer Control/Space Enhancer /Listening Position (P.85, 88, 88)• DSP Bypass Control /Speaker Setup/CarType (DTA) Setup (P.84, 81, 83)Space Enhancer1 Touch [Space Enhancer].Space Enhancer screen appears.2 Touch [Small], [Large], or [OFF].Each setting value indicates thesoundscape level.NOTE• This setting is not available during tuner source.Listening PositionYou can adjust the sound effects accordingto your listening position.1 Touch [Position].Position screen appears.2 Select listening position from[Front R] (Right front), [Front L] (Leftfront), [Front All] (All front), [All], and[User] using [2] and [3].NOTE• You can store present setting in memory bytouching [P1], [P2], or [P3] for 2 seconds. You canalso recall the setting by touching correspondingnumber.• The final distance is adjusted to the total of cartype set up value (P.83) and position setup (bothposition and position DTA) value.• If you change the car type set up value (P.83), theposition is set to [All].• Only the adjusted distance of position setup(position and position DTA values) is stored inmemory. Therefore, the final adjustment distancechanges if you change the car type set up value (P.83).