22 | Quick Start GuideConnectionAPRK SWAInstallation of this unit requires skills and experience so leave themounting and wiring to professionals. When the unit is beinginstalled the wiring should be connected via the vehicles’ fuse boxensuring the correct amperage is used. Failure to do so may result indamage to the unit and/or the vehicle or may result in fire, etc.Antenna CordFM/AM antenna inputFor safety reasons, be sure to connect the parking sensor.Light Green (Parking sensor wire)Connect to the vehicle's parkingbrake detection switch harness.Yellow (Battery wire)Black (Ground wire)- (To car chassis)Red (Ignition wire)To steering remoteIf no connections are made, do not let the cable come out from the tab.Connect to the terminal that is grounded wheneither the telephone rings or during conversation.Depending on what antenna you are using,connect either to the control terminal of the motor antenna, or to thepower terminal for the booster amplifier of the film-type antenna.When using the optional power amplifier,connect to its power control terminal.To car light control switchConnect to vehicle's reverse lamp harnesswhen using the optional rear view camera.Ignition keyswitchACCCar fuse box(Main fuse)BatteryCar fuse boxTo use the steering wheel remote control feature, you needan exclusive remote adapter (not supplied) matched to yourcar.⁄⁄⁄¤