|
English 51Hands Free Unit ControlControl Screen FunctionDisplaying the control screen and using variousfunctions.1 Display the Hands Free Control screenPress the [FNC] button for more than 1 second.or12345678910 11121 Displays the various conditions.: Displays short message status. If a cell-phone which supports SMS functionis not connected, this mark does notappear.: There is unread short message.: There is no unread short message.: Downloading Phonebook.: Indicates there is a call on hold.: Displays the signal strength.*Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unitconnected only)• You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of theBluetooth Unit as well• To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual ofyour Bluetooth Unit and your cell-phone.The more the number of bar segments,the stronger the signal.: Displays the present Auto Answeringstatus: When Auto Answering is on: When Auto Answering is off: Displays the battery drain of the cell-phone.*The more the number of bar segments,the higher the battery level.2 Displays the called phone numbers.If you have registered a phone number inthe Phonebook, the destination personname is displayed.3 Calls the displayed preset phone number.4 Displays the SMS Select screen.See (page61).5 Displays the Search for Phonebook screen.See (page 54).6 Displays the Outgoing Calls screen.See Incoming Call Records> (page 55).7 Displays the Incoming Calls screen.See Incoming Call Records> (page 55).8 Calls the preset phone number.For information on how to preset a phonenumber, see (page60).9 Displays the Hands Free Set Up screen.See (page 57).p Displays the Dialing Display screen.See (page 52).q Starts voice recognition.See (page56).w Returns to the previous screen.Next page 3
PreviousNext |