88 DNX7120/DDX712/DDX7032Tone SetupYou can set a Tone curve.1 Display the Tone screenSee (page 87).2 Set the Tone12345678 91 Tone curve becomes flat.2 Bass adjustment items are displayed.3 Middle adjustment items are displayed.4 Treble adjustment items are displayed.5 Sets the Center frequency.6 Sets the level.7 Sets the Q factor. (Only Bass and Middle canbe set)8 Bass DC Extend settings. (Only when Bass isselected)If turned "On", it extends the basscenter frequency to the low register byapproximately 20%.9 Returns to the "Equalizer" screen.Audio ControlZone ControlYou can set the front and rear audio source.1 Display Zone ControlTouch in the "AudioControl Menu" screen (page 86).121 Displays the current source.2 Returns to the "Audio Control Menu" screen.2 Set the Zone Control3556 743 Turns the Zone Function (that sets differentsource sounds for front and rear speakers)On or Off.4 Switches the front and rear audio sources.(This button appears when the Zonefunction is On.)Use "Reverse" to change over the front andrear audio sources.5 Sets the front and rear audio sourceseparately.(This button appears when the Zonefunction is On.)ڥ When the rear speaker sound is switched, the audiosource that is output at the AV OUTPUT terminal is alsoswitched to the same source.6 Adjusts the volume of the rear channel.(This button appears when the Zonefunction is On.)7 Returns to the "Audio Control Menu" screen.
