English 63Next page 3Crossover Network SetupYou can set a crossover frequency of speakers.1 Select the speaker to set the crossover2451 1231 Sets the High Pass Filter of the front speaker.2 Sets the High Pass Filter of the rear speaker.3 Sets the Low Pass Filter of the sub woofer.4 Switches to the crossover setup screen.5 Returns to the "SETUP Menu" screen.2 Display the Crossover setup screen3 Set the crossover6786 Sets the cross over frequency.When front speaker or rear speaker isselected in step 1:High Pass Filter adjustmentWhen Subwoofer is selected in step 1 :Low Pass Filter adjustment7 Sets the sub woofer phase. (Only when"Subwoofer" is set to "ON" in Audio Setupand "LPF SUB FREQ" is set to other than"Through")8 Returns to the "Audio SETUP" screen.DVD SetupYou can setup the DVD play.1 Display the DVD SETUP screenTouch in the "SETUPMenu" screen (page 62).2 Setup each item2345611 Moves to the "DVD SETUP 2" screen.2 Selects a disc menu language.* 1(See , page 64)3 Selects a subtitle language.* 1(See , page 64)4 Selects an audio language.* 1(See , page 64)5 Sets the dynamic range.* 1 ( "Wide")The dynamic range is reduced by changingfrom "Wide" to "Normal" and from "Normal"to "Dialog". "Dialog" makes the total soundvolume becomes larger as compared with"Wide" and "Normal", allowing you to listento the movie's dialog more clearly.This is effective only when you are using aDolby Digital software.The operation is available during the playstop mode.6 Returns to the "SETUP Menu" screen.
