Kenwood DNX7260BT Installation Manual

Also see for DNX7260BT: Instruction manual Instruction manual Instruction manual

Contents

6 DNX SERIESConnecting Wires to TerminalsConnector Function GuidePin Numbers forISO ConnectorsCable Colour FunctionsExternal PowerConnectorA-4 Yellow BatteryA-5 Blue/White Power ControlA-6 Orange/White DimmerA-7 Red Ignition (ACC)A-8 Black Earth (Ground)ConnectionSpeakerConnectorB-1 Purple Rear Right (+)B-2 Purple/Black Rear Right (–)B-3 Gray Front Right (+)B-4 Gray/Black Front Right (–)B-5 White Front Left (+)B-6 White/Black Front Left (–)B-7 Green Rear Left (+)B-8 Green/Black Rear Left (–)2WARNINGConnecting the ISO ConnectorThe pin arrangement for the ISO connectorsdepends on the type of vehicle you drive. Make sureto make the proper connections to prevent damageto the unit.The default connection for the wiring harness isdescribed in 1 below. If the ISO connector pinsare set as described in 2, make the connection asillustrated.Please be sure to reconnect the cable as shown2 below to install this unit to the Volkswagenvehicles etc.1 (Default setting) The A-7 pin (red) of thevehicle’s ISO connector is linked withthe ignition, and the A-4 pin (yellow) isconnected to the constant power supply.Unit VehicleA-7 Pin (Red)A-4 Pin (Yellow)Ignition cable (Red)Battery cable (Yellow)2 The A-7 pin (red) of the vehicle’s ISOconnector is connected to the constantpower supply, and the A-4 pin (yellow) islinked to the ignition.Unit VehicleA-7 Pin (Red)A-4 Pin (Yellow)Ignition cable (Red)Battery cable (Yellow)