Kenwood DPX-4010 Instruction Manual

Also see for DPX-4010: Service manual Instruction manual Mode d'emploi

Kenwood DPX-4010 Instruction Manual Manual pdf 10 page image

You can assign names to radio stations with the Station PresetMemory. Up to 30 stations can be assigned names.Adjust the frequency to the station whose name you want toenter.This function cannot be available during the clock display.Press the NAME.S button for at least two seconds."Name Set" is displayed once the station name preset mode isentered.The cursor will blink in the position where letters are entered.Press either the 4 or ¢ button to move the cursor to thedesired position.The 4 button moves the cursor to the left, and the ¢button to the right.Each time the 38 button is pressed, the characters to beentered change as listed below.Press the FM or AM button to display the desired character.Characters that can be displayed are as follows.432NOTE1Station Name Preset (SNPS)Select the band/ station that you want to have stored.Press the button (#1-6) that you want to use for the station, forat least two seconds.The button number blinks once in the display to indicate thatthe data has been stored.Recalling a Preset Station:Press the preset station button (#1-6) for the desired station.The number of the recalled station is displayed.You can store six stations in each of the FM1, FM2, FM3, andAM bands.NOTE21Store the frequency of a station. You can then recall thatstation with a single touch of a button.Station Preset MemoryPress the SRC (source) button repeatedly to select the tunermode. "TUNER" is displayed when the tuner mode has beenselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the AM band.• Auto Seek TuningPress the ¢ button to seek higher frequencies.Press the 4 button to seek lower frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travelinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.• Please see the Function Set System about selecting tuningmode. (page 25)• The ST indicator lights up when stereo broadcasts are beingreceived.NOTENOTE321TuningTuner features— 10 —English