Kenwood DPX-4010 Instruction Manual

Also see for DPX-4010: Service manual Instruction manual Mode d'emploi

Kenwood DPX-4010 Instruction Manual Manual pdf 23 page image

— 23 —You can choose the equalizer from four settings whose soundqualities are preset to match music or vehicle characteristics.Switching the Preset Equalizer:Press the EQ button."EQ mode" is displayed once the equalizer mode is entered.Each time you press the EQ button, the preset equalizerswitches as follows;Press the EQ button for at least one second to end theequalizer mode.If you make no button operation for 10 seconds, the equalizermode is automatically canceled.NOTE33 "Rock" 3 "Pops" 3 "Vocal" 3 "Heavy" 3 " Flat"21Preset Equalizer SelectionYou can adjust the level of the equalizer effects.Press the EQ button."EQ mode" is displayed once the equalizer mode is entered.Each time you press the AM or FM button, the equalizereffects switch as follows;• This adjustment cannot be made when the Preset EqualizerSelection is set to "Flat".• The default setting is "MID".Press the EQ button for at least one second to end theequalizer mode.NOTE3NOTE32 32"LOW" "MID" "HIGH"21Equalizer Level AdjustingYou can select the display to enjoy sounds with eyes.Switching the Spectrum Analyzer Display:Press the S.A button."SPEANA mode" is displayed once the analyzer mode isentered.Each time you press the S.A button, the analyzer displayswitches as follows;Press the S.A button for at least one second to end theanalyzer mode.If you make no button operation for 10 seconds, the analyzermode is automatically canceled.NOTE3ttttttttt"Peak Hold"t"SPEANA scan""Squall""Catcher""Radar""Falling Star""Music Scope""Level Meter""Rolling Bar""Stream"The spectrum analyzer display switches insequence for 10 secconds each.21Spectrum Analyzer Display SelectionIf you make no button operation for 10 seconds, the equalizermode is automatically canceled.