Kenwood DPX-4010 Instruction Manual

Also see for DPX-4010: Service manual Instruction manual Mode d'emploi

Kenwood DPX-4010 Instruction Manual Manual pdf 13 page image

— 13 —Listen to tapes recorded using Dolby B NR.Turning Dolby B Noise Reduction On/Off:Press the B NR button to switch Dolby B NR on and off.The B NR indicator lights up when it is turned on.Using Dolby B Noise ReductionFast Forwarding Tapes:Press the FM button.Rewinding Tapes:Press the AM button.Canceling:Press the 38 button.Normal tape play will begin.Fast Forwarding and Rewinding Cassette Tapes• When the faceplate has been dropped open, it might interferewith the shift lever or something else. If this happens, payattention to safety and move the shift lever or take anappropriate action, then operate the unit.• Do not apply excessive force to the open faceplate or placeobjects on it. Doing so will cause damage or breakdown.• Do not use the unit with the faceplate in the open condition.Doing so will cause breakdown.Remove a cassette from the unit when not listening to it for awhile. If you leave it in the unit too long, the tape may stick tothe tape head and cause the unit to malfunction.NOTE2CAUTIONSelect type of tape being played.Switching Tape Types:Press the METAL (Metal) button to switch the metal tapeindicator on and off and to select the tape type.Turn the MTL indicator off for normal tape (Type I) playback.Turn the MTL indicator on for the following tape types:CrO 2 (Type II) FeCr (Type III) Metal (Type IV)Selecting the wrong tape type may cause sound quality tosuffer.Switching Tape TypesSwitching the Tape display :Each time you press the DISP button, the display during tapeplay switches as follows:The tape counter is not exact, but only represents anapproximation of the elapsed time.NOTECharacterClockPlay side/Tape counterTape counter display