Kenwood DPX-5100BT Instruction Manual

Also see for DPX-5100BT: Instruction manual

Contents

6 ENGLISHGETTING STARTEDChange the crossover type1 Press repeatedly to enter STANDBY.2 Press and hold number buttons 4 and 5 to enter crossover select.The current crossover type appears.3 Turn the volume knob to select “2WAY” or “3WAY”, then press theknob.4 Turn the volume knob to select “YES” or “NO”, then press the knob.The selected crossover type appears.• To cancel, press and hold .• To adjust the selected crossover settings, ( 21, 22).CautionSelect a crossover type according to how the speakers are connected.( 33, 34)If you select a wrong type:• The speakers may damage.• The output sound level may be extremely high or low.Search for a station1 Press repeatedly to select RADIO.2 Press repeatedly to select FM1/FM2/FM3/MW/LW.3 Press S / T to search for a station.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6).Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item ( 7), then press theknob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .RADIO