Kenwood DPX-5100BT Instruction Manual

Also see for DPX-5100BT: Instruction manual

Contents

32 ENGLISHINSTALLATION/CONNECTIONDo the required wiring.( 33, 34)Dashboard ofyour carBend the appropriate tabs to hold themounting sleeve firmly in place.Installing the unit (in-dash mounting) How to remove the unit1 Fit the catch pin on the extraction keys into the holes onboth sides of the trim plate, then pull it out.2 Insert the extraction keys deeply into the slots on eachside, then follow the arrows as shown on the illustration.When installing without the mountingsleeve1 Remove the mounting sleeve and trim plate from theunit.2 Align the holes in the unit (on both sides) with thevehicle mounting bracket and secure the unit withscrews (commercially available).Use only the specified screws. Using wrong screws mightdamage the unit.