Kenwood DPX-MP3110 Instruction Manual

Also see for DPX-MP3110: Service manual

Kenwood DPX-MP3110 Instruction Manual Manual pdf 15 page image

English | 156 Confirm the Security CodePress the Control knob for at least 3 seconds.When “RE-Enter” is displayed, “Code” is alsodisplayed.7 Do the step 3 through 6 step operation, andreenter the security code.“Approved” is displayed.The Security Code function activates.⁄• If you enter a Code different from your Security Code,you have to start over from step 3.8 Exit Security Code modePress the [M.JOG] button.Entering Security CodeThe Security Code is required to use the audio unitwhen the unit is first used after removed from thebattery power source or the Reset button is pressed.1 Turn the power ON.2 Do the step 3 through 6 step operation, andreenter the security code.“Approved” is displayed.⁄• If an incorrect code is entered, “Waiting” is displayed, andthe input prohibition periods shown in the table belowis generated.After the input prohibition time lapses, “Code” isdisplayed, and you can reenter the code.Number of times theincorrect code was inputInput prohibited time1 —2 5 minutes3 1 hour4 24 hoursAuxiliary Input Display SettingSelecting the display below when changing toAuxiliary input source;• “AUX”• “DVD”• “PORTABLE”• “GAME”• “VIDEO”• “TV”1 Select Auxiliary input display setting itemduring Menu modeSelect the “Name Set” display.For how to select menu items, refer to System>(page 14).2 Enter Auxiliary input display setting modePress the Control knob for at least 1 second.The presently selected Auxiliary input display isdisplayed.3 Select the Auxiliary input displayPush the Control knob towards up or down.4 Exit Auxiliary input display setting modePress the [M.JOG] button.⁄• When operation stops for 10 seconds, the name at thattime is registered, and the Auxiliary input display settingmode closes.• The Auxiliary input display can be set only when thebuilt-in auxiliary input or the auxiliary input of optionalKCA-S220A is used. On the KCA-S220A, “AUX EXT” isdisplayed by default.Manual Clock Adjustment1 Select Clock Adjustment item during MenumodeSelect the “CLK ADJ” display.For how to select menu items, refer to System>(page 14).2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the timePush the control knob towards up or down toadjust the hours and right or left to adjust theminutes.4 Exit Clock adjustment modePress the [M.JOG] button.