Kenwood DPX-MP3110 Instruction Manual

Also see for DPX-MP3110: Service manual

Kenwood DPX-MP3110 Instruction Manual Manual pdf 8 page image

8 | DPX-MP5110U/DPX-MP4110/DPX-MP3110General OperationSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type as follows;Speaker type DisplayOFF “SP Off”For 5 & 4 in. speaker “SP 5/4”For 6 & 6x9 in. speaker “SP 6*9/6”For the OEM speaker “SP OEM”1 Enter StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Speaker Setting modePress the Control knob.“SP SEL” is displayed.3 Select the Speaker typeTurn the Control knob.4 Exit Speaker Setting modePress the Control knob.Sound Enhancer SelectYou can play back adding gorgeous heavy bass tothe sound.1 Enter the Sound Effect modePress the [SE] button."SE SEL" is displayed.2 Select the Sound effect itemTurn the Control knob.Sound effect DisplayReturns to the normal sound without Sound effect. “SE Off“Moves the sound image up a notch and adjusts bass “SE Low”Moves the sound image up two notches and adjustsbass.“SE High“Changes to the value set in Control>(page 9).“SE User“When the Sound effect is ON, the “SE“ indicator isON.3 Exit the Sound Effect modePress the [SE] button.Audio SetupYou can set Sound system, such as follows;Adjustment Item Display RangeFront High Pass Filter “HPF” Through/40/60/80/100/120/150/180/220 HzRear High Pass Filter “HPR” Through/40/60/80/100/120/150/180/220 HzLow Pass Filter “LPF” 50/60/80/100/120/Through HzSubwoofer Phase “PHAS” Reverse (180°)/ Normal (0°)Volume offset “V-Off” –8 — ±0 (AUX: -8— +8)Loudness “LOUD” Off/OnDual Zone System “2ZON” Off/On⁄• Volume offset: Sets each source’s volume as a differencefrom the basic volume.• Loudness: Compensates for low and high tones duringlow volume. (Only the low tone is compensated forwhen the tuner is selected as a source.)• Dual Zone SystemMain source and sub source (Auxiliary input) outputFront channel and Rear channel separately.- Set up the channel of sub source by “Zone2” of System> (page 14).- Select Main source by [SRC] button.- Adjust the volume of Front channel by Control knob.- Adjust the volume of Rear channel by

(page 7).- The Audio Control has no effect on sub source.1 Select the source to adjustPress the [SRC] button.2 Enter Audio Setup modePress the Control knob for at least 1 second.3 Select the Audio Setup item to adjustPress the Control knob.4 Adjust the Audio setup itemTurn the Control knob.5 Exit Audio Setup modePress the Control knob for at least 1 second.